The new Honda CR-V aims to elevate its status in the SUV market with a range of modern updates and some interesting Honda CRV Dashboard Lights. The latest version combines a mix of familiar and new design elements, reminiscent of Volvo’s lights, Mazda’s headlights, and Audi’s grille, giving it a contemporary yet unique look. Despite some fake exhaust design features, the overall exterior is smart and sleek.
Starting at just under £46,000 and going up to £54,000 for the top-spec plug-in hybrid, the CR-V offers various trims and alloy wheel options. Interior-wise, it features a simple and practical layout with decent materials, though some lower plastics feel cheap. The infotainment system is user-friendly with wireless Apple CarPlay, though it lacks wireless Android Auto. The digital driver’s display is functional but not overly exciting.
In terms of practicality, the CR-V excels with its spacious rear seats, flat floor, and ample boot space ranging from 580 to 620 liters. The rear seats fold down to accommodate larger items, and the car is family-friendly with easy access to ISOFIX points for child seats. Additionally, the back offers good knee and headroom, though it might be a bit tight for three adults due to the car’s width.
Driving the CR-V is a smooth and comfortable experience, especially in urban settings where the plug-in hybrid primarily uses electric power. However, the hybrid’s towing capacity is limited, and the brake pedal can feel unusual. On the highway, the CR-V accelerates well and maintains a relatively quiet cabin, though there’s noticeable wind and road noise compared to competitors.
Overall, the new Honda CR-V is a solid choice in the SUV market, offering comfort, practicality, and modern features, though potential buyers should weigh its high cost against its benefits.
Most popular Dashboard Lights Of Honda CRV
Symbol | Name | On/ Flashing | Troubleshooting |
Parking Brake and Brake System Indicator (yellow) | It illuminates if there is an issue with the electric parking brake system or braking other than the conventional brake system. There is a problem with the radar sensor. | The indicator may come on temporarily if the Maximum Load Limit is exceeded. Ensure the total load is within the specified Maximum Load Limit. | |
Parking Brake and Brake System Indicator (Red) | It illuminates when Brake fluid is low. There is a malfunction in the brake system. | Press the brake pedal lightly to check pedal pressure. If normal, check the brake fluid level when you stop. If abnormal, take immediate action. If necessary, downshift the transmission to slow the vehicle using engine brake. | |
Supplemental Restraint System Indicator | it illuminates when there is a problem with one of the airbag systems or seat belt tensioners. | Checked your vehicle by a dealer immediately. | |
US Canada | Automatic Brake Hold System Indicator | Comes on when the automatic brake hold system is on. | |
12-Volt Battery Charging System Indicator | Comes on when the 12-volt battery is not charging | Turn all electrical items off, but do not turn the vehicle off to prevent further battery discharge. Have your vehicle repaired immediately. | |
Lane Keeping Assist System (LKAS) | There is a problem with the system. Maximum Load Limit is exceeded. | Have your vehicle checked by a dealer. Ensure the total load is within the specified Maximum Load Limit. | |
Shift Position Indicator | Indicates the current shift position. | ||
Malfunction Indication Lamp (check engine light) | Comes on if there is a problem with the emissions control system fuel cap is missing or loose or misfire in the engine’s cylinders is detected. | Stop in a safe place and wait for the engine to cool down. Have your vehicle checked by a dealer. | |
Seat Belt Reminder Indicator | It flashes while driving if you and/or any passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals. | Ensure passengers fasten their seat belts. If it still flashing then there may be an error in sensor have your vehicle checked by a dealer. | |
Transmission System Indicator | Blinks if the transmission system has a problem. | Have your vehicle checked by a dealer immediately. | |
Low Fuel Indicator (Yellow) | Comes on when the fuel reserve is getting low. | Refuel your vehicle as soon as possible. If it still flashing there is a problem with the fuel gauge. Have your vehicle checked by a dealer. | |
Low Tire Pressure / Tire Pressure Monitoring System (TPMS) | One or more tires pressures are significantly low. The system has not been calibrated. | If the vehicle is fitted with a compact spare, get your regular tire repaired or replaced and put back on your vehicle as soon as you can. | |
Turn Signal and Hazard Warning Indicators | Blinks when you operate the turn signal lever. Blinks along with all turn signals when you press the hazard warning button. | No need to worry. | |
Low temperature | The engine coolant temperature is low. If the indicator stays on, there may be a problem with the temperature sensors | Have your vehicle checked by a dealer. | |
Vehicle Stability Assist™ (VSA®) System | Comes on if there is a problem with the brake assist system, VSA or hill start assist system. | Comes on if the VSA system is deactivated temporarily after the 12-volt battery has been disconnected, then re-connected. Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. | |
Vehicle Stability Assist (VSA) OFF Indicator | Comes on when you partially disable VSA. | All are normal. | |
Auto Idle Stop System Indicator (Amber) | Blinks if there is a problem with the Auto Idle Stop system. | Have your vehicle checked by a dealer. | |
Auto Idle Stop OFF Indicator | Comes on when the Auto Idle Stop system has been turned off by the Auto Idle Stop OFF button. | ||
Auto Idle Stop Indicator (Green) | Comes on when Auto Idle Stop is in operation. The engine automatically shuts off. | ||
Hill Descent Control System Indicator (White/Green) | Lights up in white when the hill descent control system is on and ready to use. Lights up in green when the hill descent control system is in operation. | Checked by a dealer. | |
Adaptive Cruise Control (ACC) with Low Speed Follow | Comes on if there is a problem with ACC with Low Speed Follow. | Comes on if the ACC with Low Speed Follow/ACC is deactivated temporarily after the battery has been disconnected, then reconnected. Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. Ensure the total load is within the specified Maximum Load Limit. | |
Cruise Mode Indicator (White/Green) | Lights up in white when you change to cruise mode. Lights up in green when you have set a speed for cruise control. | ||
Anti-lock Brake System (ABS) | If it comes on at any other time, there is a problem with the ABS. | Have your vehicle checked by a dealer. With this indicator on, Your vehicle still has normal braking ability, but no anti-lock function. | |
Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (White/Green) | Lights up in white when you press the button. Lights up in green when you press the RES/+/SET/− switch up or down. | Check by yourself else have your vehicle checked by a dealer. | |
System Message | When a condition or malfunction indicator comes on, a message also appears on the multi-information display. | While the indicator is on, press the (home) button to see the message again. | |
U.S Canada | Immobilizer | Flashes if the immobilizer system cannot recognize the key information. | If the indicator blinks, you cannot start the engine. Set the power mode to VEHICLE OFF, then select the ON mode again. If it repeatedly blinks, the system may be malfunctioning; have your vehicle checked by a dealer. Do not attempt to alter this system or add other devices, as electrical problems can occur. |
How to reset Tire Pressure light Honda CRV?
Reset Your Tire Pressure Light in a 2020 Honda CR-V
If you need to reset the tire pressure light in your Honda CR-V, follow these simple steps:
Step-by-Step Procedure
- Press the Home Button
- Go over to your radio and press the Home button.
- Access Settings
- Once you press the Home button, hit the Settings button.
- Select Vehicle Settings
- Navigate to and select Vehicle from the settings menu.
- Choose TPMS Calibration
- Once in the vehicle settings, select TPMS Calibration.
- Start Calibration
- Hit Calibrate to start the tire pressure monitoring system calibration.
That’s all you need to do to reset the tire pressure light in your 2020 Honda CR-V.
How to reset Honda CRV Oil light ?
Reset the Oil Light on a 2011 Honda CR-V
To reset the oil light on your OLD Model Honda CR-V, follow these step-by-step instructions:
Step-by-Step Procedure
- Start the Vehicle
- The vehicle can either be running or just in the ON position.
- Locate the Button
- Find the button in the right-hand bottom corner of the instrument cluster.
- Access the Oil Life Percentage
- Use the button to scroll through the options until you reach the oil life percentage display.
- Press and Hold the Button
- Press and hold the button for about 15 to 20 seconds until the oil life percentage starts flashing.
- Spin the Button
- Once the oil life percentage is flashing, spin the button until the oil life percentage starts flashing again.
- Press the Button Once
- Press the button once, and the oil life percentage will start flashing again.
- Press and Hold Again
- Press and hold the button again for about 15 seconds.
- Reset to 100%
- After holding for 15 seconds, the oil life percentage will reset to 100%.
You have successfully reset the oil life monitor on your 2011 Honda CR-V.